WS2012 Cluster network / DNS issues

-

hi,

does know how resolve following cluster errors (these occur approximately every 15 minutes).

event id 1228

cluster network name resource 'cluster name' encountered error enabling network name on node. reason failure was:
 'unable obtain logon token'.
 the error code '1326'.
 you may take network name resource offline , online again retry.

event id 1196

cluster network name resource 'cluster name' failed registration of 1 or more associated dns name(s) following reason:
the handle invalid.
ensure network adapters associated dependent ip address resources configured @ least 1 accessible dns server.

we have 3 networks defined

heartbeat - cluster use = internal (no dns configured)

live migration - cluster use = disabled (no dns configured)

management -  cluster use = enabled (dns configured)

we have 6 node ws2008r2 hyper-v cluster configured same network configuration no issues.

hi,

thanks post.

in order troubleshoot, may check following points:

  • check on dns server, record network name resource still exists. if record accidentally deleted, or scavenged dns server, create again, or arrange have network administrator create it.
  • ensure valid, accessible dns server has been specified indicated network adapter or adapters in cluster.
  • check system event log netlogon or dns events occurred near time of failover cluster event. troubleshooting these events might solve problem prevented clustered network name resource registering dns name.

for more detailed information network name resource registration , event id 1196, please refer following article. hope helps.

dns registration network name resource

http://blogs.msdn.com/b/clustering/archive/2009/07/17/9836756.aspx

windows server 2008 troubleshooting: event id 1196 — microsoft-windows-failoverclustering

http://social.technet.microsoft.com/wiki/contents/articles/1417.windows-server-2008-troubleshooting-event-id-1196-microsoft-windows-failoverclustering.aspx

best regards,

aiden

technet subscriber support

if technet subscription user , have feedback on our support quality, please send feedback here.

aiden cao

technet community support



Windows Server  >  High Availability (Clustering)



Comments

Post a Comment

Popular posts from this blog

WIMMount (HSM) causing cluster storage to go redirected (2012r2 DC)

-
looking options resolve error , prevent in future. thanks help. hardware: 2 node dell hv cluster running2012r2 dc 8 nic/ea in multiplex mode 4x hyper-v 4x hosts storage: 2x synology nas, accessed through iscsi hosts , cluster relevant logs: log name:      microsoft-windows-failoverclustering/diagnostic source:        microsoft-windows-failoverclustering date:          event id:      2050 task category: none level:         warning keywords:       user:          system computer:      l description: [dcm] filter wimmount found @ unsafe altitude 180700 log name:      system source:        microsoft-windows-failoverclustering date:         event id:      5125 task category: cluster shared volume level:         warning keywords:       user:          system computer: description: cluster shared volume 'volume1' ('cluster disk 1') has identified 1 or more active filter drivers on device stack interfere csv operatio
Read more

Failed to delete the test record dcdiag-test-record in zone test.com

-
ps c:\users\administrator.test> dcdiag /test:dns directory server diagnosis performing initial setup:    trying find home server...    home server = dc02    * identified ad forest.    done gathering initial info. doing initial required tests    testing server: default-first-site-name\dc02       starting test: connectivity          ......................... dc02 passed test connectivity doing primary tests    testing server: default-first-site-name\dc02       starting test: dns          dns tests running , not hung. please wait few minutes...          ......................... dc02 passed test dns    running partition tests on : forestdnszones    running partition tests on : domaindnszones    running partition tests on : schema    running partition tests on : configuration    running partition tests on : test    running enterprise tests on : test.com       starting test: dns          test results domain
Read more

Azure MFA with Azure AD and RDS

-
i have setup following lab in azure , need help. a server (domain controller) , remote desktop services. and server multi factor authentication server. i have setup following one http://www.rdsgurus.com/uncategorized/step-by-step-using-windows-server-2012-r2-rd-gateway-with-azure-multifactor-authentication/ and when im connecting got following error. the user "domain\username", on client computer "xxx.xxx.xxx.xxx", did not meet connection authorization policy requirements , therefore not authorized access rd gateway server. authentication method used was: "ntlm" , connection protocol used: "rpc-http". following error occurred: "23003". also on security log i've got following authentication details: connection request policy name: ts gateway authorization policy network policy name: - authentication provider: radius proxy authentication server: test.test.local authentication type: - eap t
Read more