confused about VPN server in windows 2008. need help

-

through rras setup both nat , vpn server on windows 2008.

using virtualbox, created 2 bridged network adapters.

during nat server setup, asked interface public interface , choose 1 connects internet ip of 192.168.1.43 , private interface 192.168.4.2.

i asked give own assigned range vpn clients. not sure about. ip range should assign? ip range of 1.43 subnet public interface or 4.2 subnet private interface?

also when create vpn connection on client side, interface's ip address should connect to?   192.168.1.43 or 192.168.4.2?

and on client computer, should assign specific ip address , default gateway or dns in nic adapter before connecting vpn server or not?

 

thanks

i asked give own assigned range vpn clients. not sure about. ip range should assign? ip range of 1.43 subnet public interface or 4.2 subnet private interface?

give range private interface.

also when create vpn connection on client side, interface's ip address should connect to?   192.168.1.43 or 192.168.4.2?

the ip of public interface. if vpn server accessible internet have configure router connected internet forward vpn traffic vpn server. in case, client computer should use public static ip address access vpn server.

and on client computer, should assign specific ip address , default gateway or dns in nic adapter before connecting vpn server or not?

no. connect, there no specific configuration. 

 

 

this posting provided "as is" no warranties or guarantees , , confers no rights.

microsoft student partner 2010 / 2011
microsoft certified professional
microsoft certified systems administrator: security
microsoft certified systems engineer: security
microsoft certified technology specialist: windows server 2008 active directory, configuration
microsoft certified technology specialist: windows server 2008 network infrastructure, configuration
microsoft certified technology specialist: windows server 2008 applications infrastructure, configuration
microsoft certified technology specialist: windows 7, configuring
microsoft certified professional: enterprise administrator

 




Windows Server  >  Network Infrastructure Servers



Comments

Post a Comment

Popular posts from this blog

WIMMount (HSM) causing cluster storage to go redirected (2012r2 DC)

-
looking options resolve error , prevent in future. thanks help. hardware: 2 node dell hv cluster running2012r2 dc 8 nic/ea in multiplex mode 4x hyper-v 4x hosts storage: 2x synology nas, accessed through iscsi hosts , cluster relevant logs: log name:      microsoft-windows-failoverclustering/diagnostic source:        microsoft-windows-failoverclustering date:          event id:      2050 task category: none level:         warning keywords:       user:          system computer:      l description: [dcm] filter wimmount found @ unsafe altitude 180700 log name:      system source:        microsoft-windows-failoverclustering date:         event id:      5125 task category: cluster shared volume level:         warning keywords:       user:          system computer: description: cluster shared volume 'volume1' ('cluster disk 1') has identified 1 or more active filter drivers on device stack interfere csv operatio
Read more

Failed to delete the test record dcdiag-test-record in zone test.com

-
ps c:\users\administrator.test> dcdiag /test:dns directory server diagnosis performing initial setup:    trying find home server...    home server = dc02    * identified ad forest.    done gathering initial info. doing initial required tests    testing server: default-first-site-name\dc02       starting test: connectivity          ......................... dc02 passed test connectivity doing primary tests    testing server: default-first-site-name\dc02       starting test: dns          dns tests running , not hung. please wait few minutes...          ......................... dc02 passed test dns    running partition tests on : forestdnszones    running partition tests on : domaindnszones    running partition tests on : schema    running partition tests on : configuration    running partition tests on : test    running enterprise tests on : test.com       starting test: dns          test results domain
Read more

Azure MFA with Azure AD and RDS

-
i have setup following lab in azure , need help. a server (domain controller) , remote desktop services. and server multi factor authentication server. i have setup following one http://www.rdsgurus.com/uncategorized/step-by-step-using-windows-server-2012-r2-rd-gateway-with-azure-multifactor-authentication/ and when im connecting got following error. the user "domain\username", on client computer "xxx.xxx.xxx.xxx", did not meet connection authorization policy requirements , therefore not authorized access rd gateway server. authentication method used was: "ntlm" , connection protocol used: "rpc-http". following error occurred: "23003". also on security log i've got following authentication details: connection request policy name: ts gateway authorization policy network policy name: - authentication provider: radius proxy authentication server: test.test.local authentication type: - eap t
Read more